Belkin P73941 - Manual (Page 13)

Installation
(continued)
11
8. Check the “CD-ROM Drives” box. Click “Next”.
9. The Windows OS will locate the driver for “Belkin
USB 2.0 Hi-Speed USB Host Controller”. Click
“Next”.
10. The Windows OS will now install the “Belkin
USB 2.0 Hi-Speed USB Host Controller” driver.
Click “Finish”.
11. The Windows OS will detect “NEC USB Open
Host Controller (E13+)”. The required driver
support will be automatically installed. No user
input is required.
12. After installation of the USB host controllers, the
Windows OS will detect “USB Root Hub” and
automatically install the required driver support.
This will repeat one more time. Installation of the
PCI Card is now complete.
Verifying Proper Installation (Windows Me OS)
After installation, check the Windows OS’s
Device Manager to confirm that the PCI Card
has been installed.
1. Right-click on “My Computer” and select
“Properties”.
2. Select the “Device Manager” tab.
3. Click on the plus sign (+) next to “Universal Serial
Bus Controllers”.