Telematrix SP550 - Manual (Page 19)

19
The Spectrum PLUS TM requires simple initial programming to set up the telephone.
The program is designed for one Administrator and one or more users. Administrator
programming features separate critical operating set up information from the user
telephone functions.
Programming Set Up Of the Spectrum PLUS TM Telephone
The Spectrum PLUS TM Quick Programming Guide is a summary list of set up options.
Additional detailed instructions are provided in the manual.
The Administrator Quick Program Guide for the Spectrum PLUS TM Telephone
Set up pre-dialing number
sequence, i.e. outside
Programming is initiated
by holding down the
“STORE” key for six
seconds.
VOICE MAIL NO.
PIN NUMBER
SECOND OF WAIT?
Set up voice mail
number. Add your
PIN with seconds of
wait time to get
access to messages.
PIN number charac-
ters will not be
displayed on the
LCD.
LIVE DIALPAD XXX
PRESS 1=ON 2= OFF
Set up either using key-
pad dialing with automatic
speaker activation, or
using key pad dialing,
pressing dial key to
activate.
PAUSE TIME x.x S
Set up pause timing 1.0S
to 5.0S. Default 3.6S.
Set up flash timing
100mS to 1000mS.
Default 600mS.
Long distance restriction.
Restrict any outgoing
number dialing that
begins with a “1” .
Set up local area code to
recognize local incoming
calls.
ENTER ACCESS NO.
STORE
FLASH TIME SET
RESTRICT 1+
PRESS 1=YES 2= NO
ENTER AREA CODE
ALL SETUP OK
CID RECORDS LOG
1 = TOTAL 2 = EACH
Set up the Caller Log
record display to
show same caller
separately logged or
show same caller in
one line display with
number of incoming
total calls.