TapeTech 98TT MudRunner Extension Handle - Manual

The extension handle is designed to extend the reach of
the Monster Mesh™ Taper and the MudRunner™.
Operation
Attach the extension by threading it into the fitting on the
bottom end of the Mesh Taper™ or MudRunner™. Twist
the extension till the threads bottom out snugly. Reverse
the process to remove.
Maintenance
Clean thoroughly with brush and water (or water hose) to remove all joint compound from the tool.
After the tool is clean & dry, lightly oil the threads with Ames® Bazooka® Oil or any light machine oil.
Extension Handle
Extension Handle
Operation and Maintenance Guide
“How Professionals Finish The Job”
Encintadora Automática
Guía De Uso y Mantenimiento
“Roll With The Gold”
©2008 TapeTech Tool Co, Inc. All Rights Reserved Revised 10.08
3350 Breckinridge Blvd. Suite 100
Duluth, GA 30096
1-800-426-6256 770-243-2617