BT Synergy 5100 User Manual
Page 51
51
If you experience any problems, please call the Helpline on 0800 145 6789* or email [email protected]
Help
No display
• The batteries may be flat, dead or incorrectly inserted. Recharge or replace the batteries.
icon flashes
• Is the handset registered correctly to the base, see page 47.
• Check that the mains power is correctly connected.
• Check that the handset is within range of the base.
• The batteries are low, place the handset on the base/charger to recharge.
icon not scrolling
• Try cleaning the charging contacts.
• Check that the mains power is correctly connected.
You hear the busy tone when you press
.
• Make sure the handset is in range of the base.
• Another handset registered to your BT Synergy 5100 base may be on the line.
No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your network provider, see page 33.
• The caller may have withheld their number.
• An exact name/number match was not found in your directory. Check that you have stored the full STD dialling code.