BT Synergy 5100 - Manual (Page 24)

24
If you experience any problems, please call the Helpline on 0800 145 6789* or email [email protected]
Handset settings
Auto talk
1. Press menU, scroll
to settings and press select.
2. set HanDset is highlighted. Press select.
3. Scroll
to aUto talk and press select.
4. Scroll
or
to on or off then press select.
5. Press Back to return to the previous menu level.
key beep
1. Press menU, scroll to settings and press select.
2. set HanDset is highlighted. Press select.
3. Scroll
to keY BeeP and press select.
4. Scroll
or
to off or on then press select.
5. Press Back to return to the previous menu level.
PABx access code
1. Press menU, scroll to settings and press select.
2. set HanDset is highlighted. Press select.
3. Scroll
to PaBx access coDe and press select.
4. Scroll
or
to on, off or set coDe then press select.
If you select set coDe, enter the switchboard access code e.g. 9 then
press save.
5. Press Back to return to the previous menu level.