Regency Classic I2400 Medium Wood Insert - Manual (Page 7)

Regency I2400M
7
installation
View from Rear of Insert
optional flue
connector Kit
The Straight Flue Adaptor (Part #846-504)
shown here, may be used to produce a secure
connection between your flue connector and the
insert collar. Detailed installation instructions are
included with the kit.
installinG Your
insert
Your insert is very heavy and will require two
or three people to move it into position. The
insert can be made a little lighter by removing
the cast iron door by opening it and lifting it
off its hinges. Be sure to protect your hearth
extension with a heavy blanket or carpet scrap
during the installation.
convection Grills
The convection grills are installed before the
unit is positioned inside the fireplace.
Position the grill on the inside bodyface side and
fasten using the bolts, washers and nuts provided
(2 per side) as shown in the diagrams.
note: the grill has a front and rear, the holes
on the front side have rounded edges
and the rear holes have flat edges.