Regency Alterra CI1250 Small Wood Insert - Manual (Page 15)

Regency CI1200 / CI1250 Wood Cast Insert
15
INSTALLATION
Stop! Read Carefully.
Cast components are very fragile. Use extreme care when handling.
1) Open the door to about 45°- then remove it from the hinge by lifting
up and out. Put door to the side on a soft surface.
Note: Door is heavy.
2) Remove two bolts from the bracket on the unit as shown below.
Line up the left side casting bracket with the left side bracket on the
unit.
Note: the CI1200 right/left sides are reversible.
4) Secure the left cast surround with the two bolts removed in Step 2.
5) Repeat Steps 2 and 4 to install right cast surround.
CI1250 Only
3) Install fan controls into left surround with 2 screws as shown below.
Note: Left side faceplate (when facing unit) will have a notch on the side
as shown below. The extension cord should also be brought out to
the side prior to installation.
CAST FACEPLATE INSTALLATION