Summit SWC1875B - Manual (Page 6)

6
MODEL SWC1102
Adjustable Legs Cabinet
Ventilation Grille
Shelves (12)
Door
Security Lock
Digital Control Panel
Handle
INSTALLATION INSTRUCTIONS
• Remove the exterior and interior packing.
BEFORE USING YOUR APPLIANCE
• Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
• Install the handle on the door. (See page 10.)
• The appliance is designed for built-in, recessed or free-standing installation.
INSTALLATION OF YOUR APPLIANCE
• WARNING: Do not store or install the appliance outdoors.
• CAUTION
: This appliance is designed for storing and cooling wines. Do not store perishable food,
medicine or other medical products.
• Place your Wine Cellar on a floor that is strong enough to support it when it is fully loaded. To level the
unit, adjust the front adjustable legs.
• For freestanding installation, 5” (127mm) of space at the back and sides of the unit and 4“ (102mm) at
the top are suggested, which allows the proper air circulation to cool the compressor and condenser
for energy saving. Even for built-in installation, it is a must to keep at least 3/16” (5mm) of space on
each side, 2” (50mm) at the back and 1/16” (1.6mm) at the top to ensure proper service access and
ventilation. And the air vent at the front of the appliance must never be covered or blocked in any way.