Summit SWC1875B - Manual (Page 15)

15
You may load your wine bottles in single rows or by stacking while taking note of the following: if you do
not have enough bottles to fill your wine cellar, it is better to distribute the load throughout the wine cellar
so as to avoid “all on top” or “all below” type loads.
- Do remove or relocate adjustable wooden shelves to accommodate larger type of bottles or increase
the capacity of the cellar by stacking the bottles up when necessary. (See instructions for removing
shelves, above.)
- Keep small gaps between the walls and the bottles to allow air to circulate. As in an underground
cellar, air circulation is important to prevent mold and for a more homogeneous temperature within
the cellar.
- To facilitate air circulation, do not overload your wine cellar.
- Avoid obstructing the internal fans (located inside on the rear panel of the wine cellar).
- To prevent bottles from falling, do not try to slide the shelves outward beyond the fixed position.
- Do not pull out more than one loaded shelf at a time as this may cause the wine cellar to tilt forward
if not properly installed.