Mise en route / start-up / inbetriebsetzung – Sulky DPX 28 User Manual
Page 23

21
FR
GB
DE
Mise en route / Start-up
/ Inbetriebsetzung
Anbau
Der DPX 28 ist mit einer Dreipunktkupplung Klasse II
mit unterer Befestigungsklammer ausgerüstet.
• Die Arbeitsstellung des DPX 28 ist waagerecht
(A=B) und (C) 70 cm vom Boden entfernt.
-
Den Kontrollpfeil
benutzen, um die
Senkrechtstellung zu regeln.
-
Maximalbelastung des Düngerstreuers sowie die
des Schleppers beachten.
1
1
Attelage
Le DPX 28 est équipé d’un attelage 3 points catégorie II
avec chape inférieure.
•
La position du DPX 28 au travail est horizontale
(A=B) et (C) à 70 cm
-
Utiliser la flèche de niveau
pour régler
l’aplomb.
-
Respecter la charge maximum du distributeur
ainsi que celle du tracteur.
1
1
Hitching gear
The DPX 28 is fitted with a class II three-point hitch
with a bottom fork.
•
The working position of the DPX 28 is horizontal
(A=B) and (C) 70 cm above the ground
-
Use the level indicator
to adjust the spreader
perpendicular.
-
Do not exceed the maximum spreader or tractor
load.
1
1
F
F
F
1
1