Briggs & Stratton 37641401 - Manual (Page 8)

MODEL 37641401 - 04 PeCo
ASSEMBLY
STEP 5:
STEP 6:
Place Clamps (A) over each end of
6" Hose (B). Attach one end of hose
onto Blower Housing (C). Attach free
end of hose over Inlet (D).
TIGHTEN CLAMPS!
8
A
C
B
D
Attach Wheel (A) to Caster
Fork (B) by using (1) axle (B4236),
(1) flat washer (K0017), (2) spacers
(S3315), (1) push nut (K0199), and
(1) cotter pin (K0085). Next attach
assembled Caster (C) to Hitch (D)
by using (2) 1" washers (K0064)
and (1) cotter pin (K0089). Attach
Hitch Assembly (D) to Main Frame
(E) by using (4) 3/8"-16 x 2 1/2" hex
bolts and (4) 3/8"-16 flange nuts.
Slide arm to open jaws on Hitch
(D) and attach to the Mount Plate
(F) and lock jaws. Place (2) 7 cu.
ft. canisters (G) into the Main
Frame (E) and close lid.
A
B
C
D
E
F
G