Bissell GARAGE PRO 18P0 - Manual (Page 8)

thermal motor protection:
an internal thermal protector has been
designed into your cleaner to protect it
from overheating. When the thermal
protector activates, the main vacuum
motor will stop operating. If this
happens, proceed as follows.
1.
Turn the vacuum OFF and unplug from
electrical outlet.
2. Check the vacuum for the source of
overheating problem (i.e. full dirt tank, dirty
filters or clog).
3. Fix the problem by following the steps in the
maintenance section of the user guide.
Face plate
Green lED light
the lED power will turn on when unit is
turned on.
yellow lED light
the lED full dirt tank indicator will turn on
when dirt tank needs emptying.
Red lED light
the lED full water tank indicator will turn on
when water level is too high.
Using the tools
Make sure the tools are secure to the hose or
wand before using.
1. Attach extension wand to end of hose by
pushing it firmly onto the hose.
2. Attach additional wand or tool, if desired,
by firmly inserting onto the wand.
3. Use the hose and wand alone or attach any
of the tools to the end of the hose wand.
Accessories
32 ft flexible crush proof hose
Hose holder
accessory caddy
Mounting bracket
8
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
peration
ug110-4053_18P0_608.indd 8 6/13/08 12:35:31 PM