Bissell GARAGE PRO 18P0 - Manual (Page 12)

M
aintenance and care
12
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Clearing clogs continued
If the clog is contained near the bottom of the
hose (close to where tools are attached), follow
these steps:
1. Remove wand or tool.
2. Attach hose to the blower outlet and turn the
power on.
3. This should dislodge the clog by blowing out
debris.
If the above methods are not successful, find the
clog by hand, then squeeze the hose and shake
until the debris dislodges.
tool maintenance
Keep tools clean and free of debris.
1.
Wipe tools clean with damp cloth.
note: the multi surface floor tool
contains a strip of red material
that should not get wet. If it needs
cleaning, wipe with damp cloth only.
a double-insulated appliance is marked
with one or more of the following: the
words DoUblE-InSUlatIon or DoUblE-
InSUlatED or the double insulation symbol
(square within a square).
In a double-insulated appliance, two
systems of insulation are provided
instead of grounding. no grounding
means is provided on a double-insulated
appliance, nor should a means for
grounding be added to the appliance.
Servicing a double-insulated appliance
requires extreme care and knowledge of
the system, and should be done only by
qualified service personnel. Replacement
parts for a double-insulated appliance
must be identical to the parts they replace.
SERVIcInG of DoUblE-InSUlatED aPPlIancE
ug110-4053_18P0_608.indd 12 6/13/08 12:35:32 PM