Accessories instructions laredo llc luminaire – Spaulding Lighting Laredo LLC User Manual
Page 3
ACCESSORIES INSTRUCTIONS
LAREDO LLC LUMINAIRE
WARNING: DISCONNECT POWER BEFORE INSTALLATION OR MAINTENANCE
READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO
INSTALL LUMINAIRE. FAILURE TO COMPLY WITH INSTRUCTIONS
COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
INSTALLING LLC-SPC VANDAL SHIELD
PTA - EXTERNAL PHOTOCONTROL FIELD INSTALLATION
Hubbell Lighting, Inc. Doc. Number:
93015030
A subsidiary of Hubbell Incorporated Revision: *
701 Millennium Blvd • Greenville, SC 29607
Phone: (864) 678-1000
SEE PAGES 1 AND 2 FOR LUMINAIRE INSTALLATION AND WIRING
WARNING: ONLY USE THE FOLLOWING APPROVED FIELD INSTALL
PHOTOCONTROL FOR THIS PRODUCT.
PTA-1 External Photocontrol - 1/2" Thread Mount , 120V
PTA-8 External Photocontrol - 1/2" Thread Mount, 120V to 277V
PTA-5 External Photocontrol - 1/2" Thread Mount, 480v
* Place vandal shield on door thru screw head. Push shield back
to engage under each screw head.
VANDAL
SHIELD
(Fig. 13)
FIG. 13
* Remove hole plug (N) from the side of housing.
* Install photocontrol (PTA) on the outside of housing.
* Apply pipe sealant to photocontrol thread to prevent leakage.
PTA
FIG. 14
APPLY PIPE
SEALANT
N
* Insert photocontrol wires thru opening.
* Wiring: Refer to Photocontrol manufacturer wiring instruction
provided with Photocontrol.
(Fig. 14)
* Lock with locknut at correct photocontrol orientation.
* Remove protective film from shield surfaces.
* Start each (4) self threading screws (V) provided to each holes
on outside door surface.
* Tighten each (4) self threading screws to secure shield in place.
V
V
PAGE 3 OF 8
PAGE 3 DE 8
PAGINA 3 DE 8