Behringer DEQ1024 - Manual (Page 13)

13
ULTRAGRAPH DIGITAL DEQ1024
5. SPECIFICATIONS
5. SPECIFICATIONS
ANALOG INPUTS
Type electronically balanced
Connector XLR
Impedance 22 kΩ at 1 kHz
Max. input level +12 or +22 dBu, switchable
CMRR 80 dB typ.
ANALOG OUTPUTS
Type servo-balanced
Connector XLR
Impedance 100 Ω at 1 kHz
Max. output level +12 or +22 dBu, switchable
SYSTEM SPECIFICATIONS
Frequency response 15 Hz to 35 kHz, +/- 3 dB
Signal-to-noise ratio 104 dBu, a-weighted,
22 Hz - 22 kHz
THD 0.004 % typ. @ +4 dBu, 1 kHz,
gain 1
Crosstalk < -85 dB, 22 Hz - 22 kHz
BYPASS
Type Relay, hard-bypass in case of
power failure
DIGITAL INPUTS
Type XLR transformer-balanced
Standard AES/EBU or S/PDIF
Input impedance 110 Ω
Nom. input level 0.2 - 5 V peak-to-peak
DIGITAL OUTPUTS
Type XLR transformer-balanced
Standard AES/EBU or S/PDIF
Impedance 110 Ω
Output level 2 - 5 V peak-to-peak
DIGITAL PROCESSING
Converter 24-bit Delta-Sigma, 64/128
oversampling
Sample rate 44.1 kHz, 48 kHz, 96 kHz
GRAPHIC EQUALIZER
Type analog 1/3-oct EQ
Frequency range 20 Hz to 20 kHz 31 1/3-oct. bands
according to ISO frequencies
Bandwidth 1/3-oct.
Control range +/-6, +/-12 dB or 0/-24 dB
(switchable)
FEEDBACK DESTROYER (FBD)
Type digital signal analysis for
feedback identification
Filter max. 10 digital notch filters per
channel, automatic feedback
suppression system
Frequency range 20 Hz - 20 kHz
Bandwidth 1/10-oct.
Control range -48 dB in 6 dB-steps
MASTER
Gain -9 dB to +9 dB
FILTER
Low Cut 20 Hz to 160 Hz (12 dB/oct.)
High Cut 2.5 kHz to 16 kHz (12 dB/oct.)
DYNAMICS
Type gate and limiter with digital IGC
(Interactive Gain Control)
Threshold variable: -60 to -10 dB (gate)
variable: -6 to +9 dB (limiter)
FUNCTION SWITCHES
Bypass switch, to deactivate equalizer
functions
Meter in/out selects between input and
output metering
Fader range sets the maximal cut/boost
for the 31 bands
Standby switches into standby mode
Pink noise -48 dB to 0 dB
FB indicator recognition of frequency band
intensity
True Curve Algorithm for achieving filter
curve linearity
DISPLAYS
Input/output level 12-digit LED display: -48/-36/-24/
-18/-12/-6/-3/0/+3/+6/+9 dB/CLIP
Function switch LED display of each switch
(except for clock and
configuration switches)
POWER SUPPLY
Voltage 85 to 250 V~, 50/60 Hz,
auto range
Power consumption typ. 10 W
Fuse T 1 A H
Mains connector Standard IEC receptacle
DIMENSIONS/WEIGHT
Dimensions (H x W x D) approx. 3.5" (89 mm)
x 19" (482.6 mm)
x 5.3" (135 mm)
Shipping weight approx. 2.5 kg (5 lbs)
BEHRINGER continuously strives to assure the highest quality standards
possible. Required modifications may be implemented without prior notice.
Technical data and the appearance of the unit may deviate from the
above values and/or illustrations.