5 the peel-off, Srp-770ii – BIXOLON label printer SRP-770II User Manual
Page 19

Rev. 1.14
- 19 -
SRP-770II
5-5 The Peel-Off
This function is used to automatically separate labels from the liner.
-
The peeler is for Label Paper only.
-
When the peeler switch is on, labels are not printed if previous printed labels have
been removed from the peeler.
-
When the peeler function is not required, turn the peeler switch off. Keeping the
switch on may result in the printer not working correctly.
-
When the peeler switch has been changed, the printer should be turned off and
back on.
1) Open the peel-off cover and turn on the peeler switch. (Check if the peeler LED is on.)
PEELER
OFF O
N
2) Remove the paper and insert the paper through the slot.
Remove
LED
This manual is related to the following products: