SciGene NoZone Ozone Scrubber - Manual (Page 4)

NoZone® Ozone Scrubber — USER GUIDE
Version 1.0a, May 2012 (408) 733-7337, [email protected] 3
I. SAFETY NOTICES
A. Intended Use
This instrument is intended for use with SciGene NoZone® enclosures to protect
sensitive dyes and arrays from ozone damage. This instrument should only be used
according to the instructions provided in the user manual. If the equipment is used in a
manner not specified by the manufacturer, the protection provided by the equipment
may be impaired.
A NoZone® WS Workspace includes a scrubber and enclosure.
B. Instrument Safety
Before operating the instrument, ensure that anyone involved with the instrument’s
operation is instructed in both general safety practices for laboratories and specific
safety practices for the instrument.
Despite the inherent safe design of the instrument, there are still some residual risks
involved. Take the following precautions:
• The unit is sealed and should not be opened.
• There are moving parts inside the unit. All fan guards must be in place before turning
on the instrument.
• If you need to check the fuse, make sure the unit is unplugged.
• This unit is intended for commercial and industrial use only.
C. Compliance
All instruments shipped to the European Union (EU; formerly known as the European
Community) have the “CE” mark on the instrument label, signifying that these
instruments comply with the Electromagnetic Compatibility and Low Voltage Directives.