Schwank STSp-CANADA User Manual
Page 26
SP-MSTP-AC-15A
STS-p Manual
RD: DEC, 2003
RL:15
KH
Page 22
17. LIGHTING INSTRUCTIONS
Refer to the lighting instructions on the inside
cover of the burner housing. Again, if the
unit goes off on safety, main power to the
unit must be manually interrupted for a 30
second reset period before the heater can be
restarted.
NOTE:
On initial installation, the unit
may lock out on safety owing to
the length of time required to
bleed air from the gas piping
system.
18. RECOMMENDED MAINTENANCE
1. Inspect the venting system each heating
season and repair or replace worn parts as
required.
2. Check the inlet air opening and the
blower periodically, cleaning off any lint
or foreign matter, as it is important that
the flow of combustion and ventilation air
must not be obstructed.
In addition we recommend the entire system
be checked once a year by a qualified service
technician.
THE SCHWANK TUBE HEATER BURNER IS COMPLETELY FACTORY ASSEMBLED
AND TESTED. ANY ALTERATION VOIDS THE CSA CERTIFICATION AND
MANUFACTURER’S WARRANTY. FOR ADDITIONAL INFORMATION, CONTACT
YOUR LOCAL DISTRIBUTOR OR SCHWANK INC.