S&S Cycle Motor Mounts for Buell Motorcycles - Manual (Page 4)

D. Steel top motor mount notes
Top Motor Mount S&S
® 93-4062 is a two-piece, bolt together
mount with slotted engine mounting holes. See Picture 4.
The slotted mounting holes allow it to work with engines
both shorter and taller than stock. It uses the OEM tie bar. A
different length tie bar to motor mount bolt will need to be
sourced, the exact length is determined by the engine height.
On engines that are either shorter or taller than stock, the tie
bar should be installed so that it sits level with the engine.
This is done by fabricating a custom length spacer to go
between the tie bar and the motor mount. The correct
length tie bar mounting bolt should have at least one full
thread showing past the end of the tie bar mounting nut.
4
Picture 4
Because every industry has a leader