S&S Cycle Freedom Performance Tuner for 2003-07 Victory Motorcycles - Manual (Page 2)

2
S&S® Freedom® Performance Tuner is designed for downloading S&S calibrations into Victory® motorcycles when S&S performance parts are
installed. Before installing S&S Freedom Performance Tuner, please ensure that your PC meets the following minimum requirements.
General PC Requirements
Windows® NT 4.0, 2000, XP, or Vista® operating systems
•
Pentium 233 MHz, or equivalent processor
•
Standard serial port (RS-232). If your PC is not equipped with a RS-232 port a USB to Serial Port adapter will be needed. If you’re using a
•
USB to serial port adapter with Digital Wrench™ you should use the same adapter. If you need a USB to serial adapter it is recommended to
purchase the adapter that is available through Diagnostic System Associates (DSA) PT # 06-10001. To order a USB to serial port adapter go
to www.diagsys.com/catalog
SVGA monitor and video card capable of 800x600 pixel resolution.
•
200 Megabytes of hard disk space required.
•
Internet Explorer 6.0 or newer.
•
Special Tool Requirements for Calibration Re-flash on 2003-2007 Victory Motorcycles
Note: The hardware listed below is the same that is used with Digital Wrench. If you do not have the hardware listed below it can be purchased through
SPX Corporation. Phone 800-328-6657.
PU-47151 – Interface Cable.
•
Picture 1.
PV-46085-2 – Victory Interface Cable Adapter.
•
Picture 2.
Before you start:
You will need to connect to the internet to perform calibration downloads using S&S Freedom Performance Tuner. Make sure you have internet
•
connection at this time.
Make sure the battery on the motorcycle is fully charged. Measure battery voltage and verify that it has a minimum of 12.5 volts with the key on.
•
Connect a battery charger if necessary to bring battery voltage level above the minimum.
Downloading S&S Calibrations using S&S Freedom Performance Tuner Software
1– Once the download of S&S Freedom Performance Tuner has been installed on your PC, double click the icon on your desk top. Picture 3
illustrates the S&S Freedom Performance Tuner icon.
2– Enter in your Username and Password and click the login button. Your Username and Password for logging in will be the same as your login
for www.ssdealer.com/victory/
Picture 1 Picture 2
Picture 3