S&S Cycle Flathead Power Super E and G Universal Stealth Air Cleaner Kit for 1936–1992 Big Twin and 1957–1990 XL - Manual (Page 5)

7 – Now that the backplate is positioned, finish torque the ¼" X 20 fasteners to 72 in.-lbs. as illustrated in Picture 9.
8 – Locate the filter, plastic filter top plate and the two ¼" X 20 flanged head fasteners as illustrated in Picture 10.
9 – Apply a drop of 243 blue Loctite® to the threads of each ¼" X 20 flanged head screw and set aside.
10 – Hold the filter on the backplate and put the filter top plate on top of the filter making sure that the word “Down” is facing down and
sitting flat on the filter and locked into the groove. Pass the ¼" X 20 flanged head screws through the plastic top filter plate, thread in and
tighten down evenly until snug and then finish torque to 72 in.-lbs. as illustrated in Picture 11.
11 – Remove the 5/16" button head screw from the plastic top filter plate. Picture 12 illustrates the button head screw.
12. – Install air cleaner cover to the stealth air cleaner kit by installing the 5/16" button head screw with 243 blue Loctite® applied to the threads
and torque to 10 ft.-lbs.
5
Picture 9
Picture 10
Picture 11 Picture 12
Filter Top Plate
Flanged Head Screws
torque to 72 in.-lbs.
5/16" button head screw
Filter
DOWN