S&S Cycle Flathead Power Super E and G Universal Stealth Air Cleaner Kit for 1936–1992 Big Twin and 1957–1990 XL - Manual (Page 3)

Installing the Fast Idle Lever Assembly to the Backplate
1 – Locate the fast idle lever package.
2 – I nstall the fast idle lever assembly as shown in Figure 1. Apply a small amount 243 blue Loctite® to the threads of the screw and thread into
the backplate. Be careful not to over tighten.
3 – Once the fast idle lever is assembled on the backplate, move it up and down to making sure it functions properly.
Installing the S&S® Stealth AC Kit
1 – Locate the S&S backplate and the three backplate screws. See Picture 3.
2 – Install the three ¼" X 20 screws in the backplate as illustrated in Picture 4.
3
Picture 4 Picture 3
1- Fast idle friction washer
2- Fast idle steel washer
3- Fast idle nylon washer
4- Enrichment lever
5- Fast idle brass washer
6- Fast idle screw
Figure 1
1
2
3
4
3
5
6
¼" x 20 Screws Installed