Robustel M1000 USB User Guide - Manual (Page 14)

Robustel GoRugged M1000 USB User Guide
RT_UG_M1000 USB_v.2.0.0
17.01.2014 13 / 39
Confidential
2. Don’t touch the metal surface of the SIM card in case information in the card is lost or destroyed.
3. Don’t bend or scratch your SIM card. Keep the card away from electricity and magnetism.
4. Make sure to disconnect the power source from your modem before inserting and removing your SIM card.
2.5 Connect the External Antenna (SMA Type)
Connect this to an external antenna with SMA male connector. Make sure the antenna is for the correct frequency as
your GSM/GPRS/UMTS/HSPA
operator with impedance of 50ohm, and also connector is screwed tightly.
2.6 Connect the Modem to External Device
User can use the USB cable to connect the modem’s USB Connector to external slave devices / controller / computer.
Note: User needs to install relevant USB driver to PC, which you can find out in the CD.
USB 2.0 USB 2.0
Screw tightly