Robustel M1000 MP Quick Guide User Manual
Page 5
Robustel GoRugged M1000 MP Quick Guide
RT_QG_M1000 MP_v.1.0.0
24.01.2014
5 / 5
3.
Select Protocol as “Serial”.
4.
Select relevant COM port and match the parameters as below, click the “Next” button to finish this session.
Note:you need to match the serial parameters as: 115200,8,n,1, and disable “RTS/CTS”.
Note: Please refer to Robustel GoRugged M1000 MP User Guide to get more details about M1000’ configuration.