RKI Instruments RP-6 User Manual
Page 9
RP-6 Pump for the GX-94
• 9
Figure 3: Connecting the Optional Hose & Probe
4. Attach the rubber sample nipple or an optional hose and
probe to the inlet fitting.
5. Attach the GX-94 to your belt or clothing using the belt clip.
6. Turn on the pump unit by turning the ON/OFF switch to the
ON position.
CAUTION: While the sample adapter is installed on the GX-94, the
pump unit must be on and connected to the sample
adapter for the GX-94 to function as a gas detection
monitor.
7. Go to the area to be sampled.
If the rubber sample nipple is used, use the pump unit to
sample the area of interest by holding it in the area. If
sampling from a vessel or an enclosed area is desired, insert
the rubber sample nipple into the vessel or enclosed area.
Optional Probe
Optional Hose