RKI Instruments RP-6 - Manual (Page 13)

RP-6 Pump for the GX-94 • 13
6. Install the new hydrophobic filters and/or wire mesh disk
making sure a hydrophobic filter is located on each side of
the wire mesh disk.
7. Reinstall the gasket with the parts into the pump unit.
8. Reinstall the filter holder with the cotton dust filter. Align the
two tabs on the bottom of the filter holder with the two slots
in the pump unit. Push the filter holder into the pump unit
and turn it about 1/8 turn clockwise until it snaps into place.