RKI Instruments RP-6 - Manual (Page 5)

RP-6 Pump for the GX-94 • 5
Description
The RP-6 Pump is a sample drawing accessory for the RKI
Instruments Inc. Model GX-94 Gas Monitor. It consists of the
pump unit, the GX-94 sample adapter, the coiled hose, and the
rubber sample nipple.
Figure 1: RP-6 Pump Component Location
Pump Unit
The pump unit is housed in a red plastic case. A GX-7 type male
quick connect fitting is located on one end of the pump unit.
This is the inlet fitting to the pump unit. The GX-7 quick connect
is installed in a removable clear plastic filter holder. A cotton
dust filter is inside the filter holder. The filter holder may be
Inlet Fitting
(GX-7 Type)
Filter Holder
Coiled Hose
Sample Adapter
Exhaust Fitting
Battery Cap
Thumbscrew
Pump Unit
On/Off Switch
Rubber Sample
Nipple
Power LED
Low Flow LED