RKI Instruments 35-3001-06-01 - Manual (Page 23)

35-3001-06-01 Combustible Gas/Oxygen Sample-Draw Detector • 19
2. Verify that the controller display reading stabilizes at 20.9%.
3. Store the components of the calibration kit in a safe and convenient place.
Parts List
Table 2 lists replacement parts and accessories for the sample-draw detector.
Table 2: Parts List
Part Number Description
06-1248RK Sample tubing, 3/16 x 5/16, specify length
06-1248RK-03 Sample tubing, 3/16 x 5/16, 3 feet (for calibration kit)
07-0053RK Gasket for oxygen flow block
07-0110RK Gasket for IR flow block
30-1016RK Pump
33-0165RK Hydrophobic filter
33-0167RK Particle filter
61-5039RK-CH4 Infrared combustible gas sensor, plug-in type, LEL range
71-0292RK Operator’s Manual, 35-3001-06-01 Sample-Draw Detector
81-0002RK-01 Calibration cylinder, 50% LEL hydrogen in air 34 liter
81-0002RK-03 Calibration cylinder, 50% LEL hydrogen in air, 103 liter
81-0007RK-01 Calibration cylinder, 50% LEL hexane in air, 34 liter
81-0012RK-01 Calibration cylinder, 50% LEL methane in air, 34 liter
81-0012RK-03 Calibration cylinder, 50% LEL methane in air 103 liter
81-0076RK-01 Zero air calibration cylinder, 34 liter
81-0076RK-03 Zero air calibration cylinder, 103 liter
81-0078RK-01 Calibration cylinder, 100% nitrogen, 34 liter
81-0078RK-03 Calibration cylinder, 100% nitrogen, 103 liter
81-1054RK Regulator, demand flow, for 58 and 103 liter steel calibration cylinders
81-1055RK Regulator, demand flow, for 17 and 34 liter steel calibration cylinders
OS-B11 Oxygen sensor