RKI Instruments 35-3000RKA-10 - Manual (Page 4)

4 • 35-3000RK-10 PPM Hexane Sample Draw Detector
Overview
This manual describes the 35-3000RKA-10 ppm hexane sample draw detector. This
manual also describes how to install, start up, configure, maintain, and calibrate the
sample draw detector when it is used with a gas monitoring controller. A parts list at the
end of this manual lists replacement parts and accessories for the sample draw detector.
Specifications
Table 1 lists specifications for the sample draw detector.
Table 1:Specifications
Description Specification
Input Power 18 - 30 VDC
Target Gas Combustible Gas, Calibrated to Hexane
Detection Range 0-500 ppm Hexane
Construction Fiberglass/polyester NEMA 4X Housing
Dimensions 8.5 in. H x 6.5 in W x 4.25 in. D
Weight 4.5 pounds
Sampling Method Sample Draw
Sample Flow 1.5 SCFH nominal
Signal Output 4 to 20 mA, 500 ohm impedance max.
Response Time 90% in 30 seconds
Accuracy ± 5% of detection range