RKI Instruments 35-3000RK-LEL/O - Manual (Page 23)

35-3000RK-LEL/O Sample-Draw Detector • 19
Parts List
Table 2 lists replacement parts and accessories for the sample-draw detector.
Table 2: Parts List
Part Number Description
06-1248RK Sample tubing, 3/16 x 5/16, specify length, (for calibration kit)
17-2593RK Brass insert for flexible 1/4 OD x .17 ID tubing (for INLET and EXHAUST fit-
tings)
17-2683RK Front ferrule (for INLET and EXHAUST fittings)
17-2688RK Back ferrule (for INLET and EXHAUST fittings)
30-0610RK Pump
33-0165RK Hydrophobic filter
61-0145RK Combustible gas sensor, plug-in type, LEL range
65-0601RK Oxygen sensor (plug-in type)
71-0223RK Operator’s Manual, 35-3000RK-LEL/O Sample-Draw Detector (this document)
81-0002RK-01 Calibration cylinder, 50% LEL hydrogen in air 34 liter)
81-0002RK-03 Calibration cylinder, 50% LEL hydrogen in air, 103 liter
81-0007RK-01 Calibration cylinder, 50% LEL hexane in air, 34 liter
81-0012RK-01 Calibration cylinder, 50% LEL methane in air, 34 liter
81-0012RK-03 Calibration cylinder, 50% LEL methane in air 103 liter)
81-0076RK-01 Zero air calibration cylinder (34 liter)
81-0076RK-03 Zero air calibration cylinder (103 liter)
81-0078RK Calibration cylinder (100% Nitrogen; 17 liter)
81-0078RK-01 Calibration cylinder (100% Nitrogen; 34 liter)
81-0078RK-03 Calibration cylinder (100% Nitrogen; 103 liter)
81-1054RK Regulator (demand flow), for 58 and 103 liter steel calibration cylinders
81-1055RK Regulator (demand flow), for 17 and 34 liter steel calibration cylinders