Operating the machine, Warning, 7 inserting bottom cone – Retsch PT 200 User Manual
Page 20: 8 inserting sample vessel

Operating the machine
20
WARNING
Risk of a fatal electric shock
-
An electric shock can cause injuries in the form of burns and cardiac
arrhythmia, respiratory arrest or cardiac arrest.
• Do not clean the blender under running water. Use only a cloth dampened
with water.
• Disconnect the power supply plug before cleaning the blender.
Pos : 6.15 /00010 Bedi enungsanleitung en Kapitels ammlungen/PT200 (2011)/0015 PT 200 Bedienung/1526 PT200 M odul Ein Aus Schalten @ 3\mod_1303297651889_9.doc @ 25249 @ @ 1
Fig. 8: On/off switch
The on/off switch (O) is located on the left side of the device below the operating
element.
•
Press the on/off switch (O).
Pos : 6.16 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 Unter kegel einsetzen @ 4\mod_1314713371004_9.doc @ 25528 @ 2 @ 1
5.7 Inserting bottom cone
Pos : 6.17 /00010 Bedi enungsanleitung en Kapitels ammlungen/PT200 (2011)/0015 PT 200 Bedienung/1575 M odul PT200 U nter kegel ei ns etz en @ 4\mod_1314713474722_9.doc @ 25536 @ @ 1
Fig. 9: Inserting the bottom cone
•
Hold the two latch pins (LP) to insert the bottom cone (C).
•
Pull out the two latch pins (LP) and insert the bottom cone into the holder of
the top cone (TC).
•
Turn the bottom cone in a clockwise direction until the two latch pins lock in.
•
It may be necessary to move the bottom cone (C) a little after insertion so
that the two latch pins can lock in.
Pos : 6.18 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 Pr obengefäß eins etzen @ 3\mod_1302780091987_9.doc @ 25081 @ 2 @ 1
5.8 Inserting sample vessel
Pos : 6.19 /00004 Warnhinweis e/V0066 VOR SICHT Sc hnittverletzungen und Personensc häden Gl ass plitter (PT 200) @ 4\mod_1314774523654_9.doc @ 25566 @ @ 1
LP
C
TC
O