Notes on these operating instrutions, Warnings repairs, Personal injuries – Retsch AS 400 User Manual
Page 3: Material damage
06.11.2012
Retsch GmbH
3
Notes on these operating instrutions
These operating instructions for the analytical sieving ma-
chine type AS 400 control give all necessary information
on the sections mentioned in the contents.
They give instructions to the target group(s) defined in the
respective sections for safe, correct handling of the
AS 400 control. It is important that each target group or
groups is (are) familiar with the relevant section, in order
to ensure safe, reliable handling of the machine according
to its intended use.
This technical documentation is for use as a reference
work and as a learning aid. The individual sections are
complete in themselves.
No repair instructions are included in these operating in-
structions. If repairs are necessary please contact your
supplier or Retsch GmbH directly.
Retsch
Warnings
The following signs are used to warn of hazards:
Personal injuries
Material damage
Repairs
These operating instructions do not contain any repair in-
structions. In the interests of your own safety, repairs
should only performed by Retsch GmbH or an authorised
representative (service technician).
In this case, please notify the following:
The local Retsch representative
Your supplier
Retsch GmbH direct
Your address for service: