Retsch AS 400 - Manual (Page 10)

06.11.2012

Retsch GmbH 10
Transport and assembly
Packaging
The packaging used is selected with the shipping mode in
mind. It complies with the generally applicable packaging
guidelines.
Please retain the packaging for the duration of the war-
ranty since, in case of a complaint, returning in unsuit-
able packaging can jeopardize your warranty claims.
Transport
Whilst transporting the AS400 control to the final place of
assembly after unpacking, ensure that the AS400 control
is only held by the underside of the sheet metal housing.
The plastic front is not suitable for this purpose.
During transportation, do not subject the AS400 con-
trol to impacts, jolts or vibrations. The electronic and
mechanical components could otherwise be damaged.
Temperature fluctuations
In case of wide temperature fluctuations (during ship-
ment by air, for instance), protect the AS400 control
from condensation. The electronic components could
otherwise be damaged.
Intermediate storage
Ensure that the AS400 control is stored in a dry place,
including intermediate storage.
Requirements for the assembly site
Ambient temperature :
5°C to 40°C
When the ambient temperature exceeds or falls below that
specified, the electrical and mechanical components may be
damaged, and performance data changed to an unknown
extent.