Retsch AS 200 control - natural frequency - Manual (Page 27)

Retsch GmbH 27
General
Cleaning
For thorough, gentle and time-saving cleaning of your
analytical sieves we recommend Retsch ultrasonic baths.
Please send for our special leaflet „Care and cleaning of
analytical sieves”.
Do not clean the AS 200 control under running water.
Danger to life through current surge.
Use only a cloth moistened with water.
Solvents are not allowed.
Maintenance
If your AS 200 control is used for quality control it should be
calibrated regulalrly according to DIN EN ISO 9000. Please
contact your dealer or Retsch GmbH directly.
Otherwise the AS 200 control is practically maintenance-free.
Replacing fuses
B
Two glass fuses SPT 6.3A (5x20mm) are required.
Remove mains plug
Pull out fuse holder B
Replace fuses
Insert fuse holder B
Accessories
Sieve clamping unit - economy
Sieve clamping unit - standard
Sieve clamping unit – comfort (fast clamping action)
Universal clamping cover – economy/standard
for sieves 100 / 150 / 200 / 203mm
Universal clamping cover – comfort (fast clamping
action)
for sieves 100 / 150 / 200 / 203mm
Universal wet sieving clamping cover –
economy/standard
for sieves 100 / 150 / 200 / 203mm
Universal wet sieving clamping cover - comfort
for sieves 100 / 150 / 200 / 203mm
Short threaded rods for small sieve sets
max. 5 analytical sieves, height 50mm
Additional weight of 2100 grams
Cover for dust-free storage of complete sieve sets
Intermediate rings for increasing the height of the
sieve frame – used for coarse grained sieving material
Intermediate bottom for carrying out several sieving
sections in one operation
Software EasySieve