Cleaning and service, 2 check the sealing lip – Retsch GM 200 User Manual
Page 33
Cleaning and service
33
Pos : 9. 6 / 00010 Bedienungsanlei tungen Kapit elsamml ung en/GM 200 ( 2010)/0025 GM200N R einigung und Wartung/ 2510 Modul Dichtlippe t aus chen @ 5\mod_1343820879046_9. doc @ 32850 @ 2 @ 1
6.2 Check the sealing lip
Fig. 16: Sealing lip (Gs)
Check the sealing lip (Gs) for damage at regular intervals.
•
Replace the sealing lip (Gs) if damaged.
[No. 05.111.0239]
Notice
Moisture can penetrate the inside of the housing if the sealing lip (Gs) is
damaged.
Gs
See also other documents in the category Retsch Equipment:
- BB 50 (41 pages)
- BB 100 (24 pages)
- BB 200 (24 pages)
- BB 300 (24 pages)
- Cryomill (68 pages)
- CryoMill Autofill 50l (28 pages)
- DM 200 (20 pages)
- DM 400 (60 pages)
- Emax (67 pages)
- GM 300 (44 pages)
- MM 200 (32 pages)
- MM 400 (32 pages)
- PM 100 (44 pages)
- PM 400 (36 pages)
- PM GrindControl (48 pages)
- RM 200 (36 pages)
- RS 200 (32 pages)
- SK 100 (24 pages)
- SM 100 (48 pages)
- SM 200 (48 pages)
- SM 300 (44 pages)
- Cyclone - SM 300 (20 pages)
- SR 200 (24 pages)
- SR 300 (24 pages)
- TWISTER (44 pages)
- ZM 200 (32 pages)
- AS 200 jet - Automatic Vacuum Regulation (6 pages)
- AS 200 control - natural frequency (32 pages)
- AS 200 (36 pages)
- AS 200 jet (56 pages)
- AS 200 jet (48 pages)
- AS 200 tap 30.025.0001 (28 pages)
- AS 200 tap 30.025.1001 (28 pages)
- AS 300 (32 pages)
- AS 400 (32 pages)
- AS 400 (28 pages)
- AS 450 basic (40 pages)
- AS 450 basic (44 pages)
- AS 450 control (52 pages)
- DR 100 (40 pages)
- DR 100 (28 pages)
- PP 25 (32 pages)
- PP 40 (28 pages)
- PT 100 (36 pages)