Powertrax 9204603000 User Manual

Page 7

Remove Differential cover and

drain fluid. Clean the diff cover and
housing sealing surface.

Expose pinion shaft; remove

retaining pin/roll pin. Remove pin-
ion shaft.

Remove the axle retaining bolts

for the passenger side axle shaft
located on the inside of the brake
backing plate. Pull out passenger
side axle shaft 2”-3”.

Note: In differentials with very low gear

ratios (numericaly high), the ring gear thick-

ness may prevent the removal of the pinion

shaft. If this occurs, the differential case

must be removed from the car and the ring

gear must be taken off before proceding.

Please refer to your vehicle’s repair manual

for instructions on how to remove the case

and ring gear.

Note: For front axle applications, the driver’s

side axle needs to be removed. Please

consult your vehicle’s repair manual for spe-

cific instructions.