Powertrax 9204603000 - Manual (Page 12)

19. Verify spacer paddle is aligned
with paddle opening in synchro ring
and press driver/spacer down onto
coupler. Driver teeth should be fully
engaged all the way around.
10
20.
Insert the slotted active spacer
into the slotted driver. Seat the
spacer paddle at the paddle open-
ing in driver (missing extended
tooth).
21. Verify paddle opening (widest
gap) in other synchro ring is facing
away from you.
Paddle Opening
Note: The slot in the driver and spacer
is used in c-clip applications only. For
non c-clip differentials, ignore the slots.