Powertrax 9204603000 User Manual

Page 16

33.

Keeping both drivers fully

engaged, rotate both wheels back
1/4 turn to expose pinion shaft
opening. Make sure saddle springs
are all fully seated.

31.

Check the gap between driv-

ers using check block. The nar-
row side of the block should fit
between drivers, but the wider
side should not fit.

32.

Push passenger side axle shaft

inward through coupler as far as it
will go and bolt axle shaft back to
housing.

No-Go

Saddle
springs

Pinion shaft
opening

If gap is incorrect, STOP and call
Powertrax Technical Support at
864-843-9275.

There may be a

problem with your differential case.