Phoenix Audio Technologies DUET VCA - Manual (Page 9)

5. Computer (USB) Connection
Plug the supplied USB cable into the Duet on one side and into your computer’s USB port on the
other side. The Duet will turn on (powered by the USB), enumerate as a PhnxMT202 device
(AK4571 in older models) and start working.
Note: the Duet will be set as both your audio input device (microphone) and audio output device
(speaker). You may want to set up the playback and recoding level for optimum results. If you have
an older version that identifies itself as AK4571 you need to make sure that the microphone is
muted for playback so that you don’t hear yourself through your unit’s loudspeaker.
Please refer to the “How to set the audio levels through your computer” part of the manual, located
in section 4.
- 9 – Phoenix Audio Technologies www.phnxaudio.com