Phoenix Audio Technologies DUET VCA - Manual (Page 26)

3) Plug the Dummy Plug into Duet #1's 3.5mm jack.
4) Set the output gain switches to their lower position (0 dB gain).
5) Power Duet #2 using the supplied power adaptor (you can also power it from a USB port)
Note: Plugging the Dummy Plug signals to the Duet that it is in a Daisy Chain mode and activates
all the required algorithms. Failing to do so will disable the echo canceling algorithm and other
critical functions.
Note: Phoenix offers a set of 11 foot RJ11 -> 2.5mm cables and a Dummy Plug that can assist you
in the ganging connection (part number MT221).
- 26 – Phoenix Audio Technologies www.phnxaudio.com