Bissell FLIP-IT 5200 - Manual (Page 10)

10
Troubleshooting
Water & Formula are draining out from the clean tank
Possible Causes Remedies
Clean Tank Black Cap & Valve are not on tight Remove Black Cap & Value
and attach tightly
Clean Tank Black Cap & Valve are cross threaded Remove Black Cap & Valve
and make sure it is
screwed on straight
and tightly
No suction
Possible Causes Remedies
Filter may be dirty or clogged Remove filter from the Dirty
Tank and clean
Wet vacuum nozzle may not be on properly Make sure Wet Vacuum
Nozzle is on tight and
snapped into place
Tank is full Empty Tank
Filter is wet Make sure filter is
completely dry before
placing back into the unit.
Water is not flowing
Possible Causes Remedies
Something is caught and clogging the air path Unplug unit. Remove Wet
Clean Nozzle and insert a
blunt object into the
air path to remove any
potential clog
Clean Tank is not inserted properly Remove Tank and reinsert
into the unit
1 1
2 2
1 1
2 2
3 3
1 1
2 2
WARNING:
To reduce the risk of
fire, electric shock or
injury unplug from outlet
before servicing.
Your Flip It can be stored Ready-to-Use, by leaving water
and formula in the unit. Be sure to remove wet Gentle
Clean™ Pad before storing.
Storing The Flip-It
Tip:
If the Pleated Filter is rinsed
with warm water to clean,
it is recommended to leave
it out of the unit to air dry
before placing it back in
the unit.
4 4