Noctua NH-U9B - Manual (Page 4)

NH-U9B-AM2(+) | Installation Manual
Attaching the fan
Step 6:
First stick the 2 anti-vibration strips onto the cooling fins in
order to dampen minor vibrations emitted by the fan.
Now screw the fastening brackets to the mounting bars em-
ploying the pressure springs and the respective screws.
When employing the 90° fastening brackets, please use the
supplied mounting-tool to tighten the springscrews.
Caution: Tighten the screws until they stop.
Align the mounting holes of the fastening brackets with those
of the mounting bars.
Step 5:
Attaching the heatsink to the CPU
Adapter (L.N.A.) or Ultra-Low-Noise Adapter (U.L.N.A.) in
order to further reduce the fan’s operating noise.
Caution: When using the (U.)L.N.A., check the temperature
of your CPU using appropriate software (e.g. the respective
applications of your mainboard manufacturer), in order to
evade automatic throttling of the CPU due to the increased
temperature. If the cooling performance is insufficient, please
increase case ventilation or remove the (U.)L.N.A.
Even with high-grade products and strict quality control, the
possibility of defects cannot be eliminated entirely. Therefore,
we aim at providing the highest possible level of dependability
and convenience by offering a warranty period of 72 months
and direct, fast and straightforward RMA service.
In case of warranty, you can either request RMA at your retailer
or use our Direct RMA Service. For further information, please
consult www.noctua.at. In order to process your RMA enquiry,
we need a proof of purchase, so please don’t forget to keep
your invoice!
Please also note that any modifications to the cooler, fan or
mounting parts will void your warranty.
Warranty
For all enquiries concerning your Noctua cooler, both your
retailer and the international Noctua support team at
[email protected] are at your service.
Please also consult the FAQ section on our website
www.noctua.at.
Support & FAQs
Then attach the fan to the heatsink using the 2 steel clips,
placing it so that it blows onto the heatsink (You can optionally
use the second pair of clips to install a second fan).
Connect the fan to the mainboard, power supply or fan con-
troller. Depending on your CPU and the temperature inside
the case, you may interconnect the supplied Low-Noise
Low-Noise Adapter (L.N.A.)
1300 RPM, 13.1 dB(A)
Ultra-Low-Noise Adapter (U.L.N.A.)
1000 RPM, 7.9 dB(A)
Black Blue