Noctua NH-C12P SE14 - Manual (Page 4)

NH-C12P SE14 | Installation Manual AMD
Attaching the fan
Step 5:
First stick the 4 anti-vibration pads onto the cooling fins in
order to dampen minor vibrations emitted by the fan. Then
attach the fan to the heatsink using the 2 steel clips, placing it
so that it blows onto the heatsink.
Even with high-grade products and strict quality control, the
possibility of defects cannot be eliminated entirely. Therefore,
we aim at providing the highest possible level of dependability
and convenience by offering a warranty period of 72 months
and direct, fast and straightforward RMA service.
In case of warranty, you can either request RMA at your retailer
or use our Direct RMA Service. For further information, please
consult www.noctua.at. In order to process your RMA enquiry,
we need a proof of purchase, so please don’t forget to keep
your invoice!
Please also note that any modifications to the cooler, fan or
mounting parts will void your warranty.
Warranty
Caution: When using the (U.)L.N.A., check the temperature
of your CPU using appropriate software (e.g. the respective
applications of your mainboard manufacturer), in order to
evade automatic throttling of the CPU due to the increased
temperature.
If the cooling performance is insufficient, please increase case
ventilation or remove the (U.)L.N.A.
Connect the fan to the mainboard, power supply or fan con-
troller.
Depending on your CPU and the temperature inside the case,
you may interconnect the supplied Low-Noise Adapter (L.N.A.)
or Ultra-Low-Noise Adapter (U.L.N.A.) in order to further re-
duce the fan’s operating noise.
1.1.
For all enquiries concerning your Noctua cooler, both your
retailer and the international Noctua support team at
[email protected] are at your service.
Please also consult the FAQ section on our website
www.noctua.at.
Support & FAQs
4.
3.
2.
Low-Noise Adapter (L.N.A.)
900 RPM, 13.2 dB/A
Ultra-Low-Noise Adapter
(U.L.N.A.), 750 RPM, 10.1 dB/A