Bissell PowerSteamer 8806 series - Manual (Page 6)

This user’s guide has been designed to help you
get the utmost satisfaction from your BISSELL
PowerSteamer. You’ll find assembly and operat-
ing instructions, safety precautions, as well as
maintenance and troubleshooting instructions.
Please read this guide thoroughly before
assembling your deep cleaner.
Pay particular attention to the product diagram, assembly
instructions, and part names. Locate and organize all parts
before assembly. Familiarize yourself with the parts and
where they go. Following this user’s guide will greatly
enhance your ability to get the most performance from your
BISSELL PowerSteamer for many years.
Your PowerSteamer comes in two, easy to
assemble components:
Handle assembly
Lower body
The only thing you will need to assemble your cleaner
is a Phillips head screwdriver.
1. Slide the handle assembly down into the lower
body until it will go no further.
2. Secure the handle by placing one (1) Phillips head
screw (supplied) through the screw opening
in the lower body and into the rear of the handle
assembly. Tighten with screwdriver until secure.
3. Wrap power cord and flex hose as shown.
PowerSteamer assembly is now complete.
WARNING:
Do not plug in your
cleaner until you have
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures.
H
ow to Use this Guide
A
ssembly
6
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Phillips
Head
Screw
1.
2.
3.
ug120-4080_7350_908.indd 6 10/14/08 1:28:00 PM