Bissell PowerSteamer 8806 series - Manual (Page 16)

Reduced spray or no spray.
Possible Cause Remedies
1. Bladder may be empty. 1. Refill bladder with hot tap water.
2. SmartMix tank may be empty. 2. Fill with BISSELL advanced
cleaning formula.
3. The filter may be clogged. 3. Clean out flow indicator filter,
page 12.
4. Tanks may not be seated properly. 4. Turn power OFF (O); remove &
reseat tanks.
5. Pump may have lost prime. 5. Turn power OFF (O); after 1
minute turn ON and press
Trigger.
6. The pump belt may be broken. 6. Turn the machine OFF (O) and unplug
from the outlet. To check if a pump
belt has broken, you will need a flat
head screwdriver. Insert the blade
end into the lower slot of the belt
access door to release the lower
snap. If necessary, insert the blade
end into the upper slot to release the
upper snap. Examine the belt for
breakage. You should be able to
see the pump belt looped around the
motor shaft. If it is broken or missing,
please refer to Replacement Parts on
page 19 before calling Consumer
Services. Complete installation
instructions will accompany the
replacement belt.
T
roubleshooting WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.
Insert
Screwdriver
Blade Here
Lift Here
16
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
ug120-4080_7350_908.indd 16 10/14/08 1:28:09 PM