Trak 14 — safety message alert symbols – Multiquip MS1420E User Manual
Page 7

TRAK-14 — OPERATION & PARTS MANUAL — REV. #2 (09/07/04) — PAGE 7
TRAK 14 — SAFETY MESSAGE ALERT SYMBOLS
Over Speed Conditions
NEVER tamper with the factory settings of the
engine governor or settings. Personal injury
and damage to the engine or equipment can
result if operating in speed ranges above
maximum allowable.
Respiratory Hazard
ALWAYS wear approved respiratory protection
that complies with ANSI-Z87.1.
ALWAYS wear approved eye and hearing
protection that complies with ANSI-Z87.1
Sight and Hearing hazard
Equipment Damage Messages
Other important messages are provided throughout this manual
to help prevent damage to your concrete saw, other property, or
the surrounding environment.
Engine exhaust gases contain poisonous
carbon monoxide. This gas is colorless and
odorless, and can cause death if inhaled.
NEVER operate this equipment in a confined
area or enclosed structure that does not
provide ample free flow air.
Gasoline is extremely flammable, and its
vapors can cause an explosion if ignited. DO
NOT start the engine near spilled fuel or
combustible fluids. DO NOT fill the fuel tank
while the engine is running or hot. DO NOT
overfill tank, since spilled fuel could ignite if it
comes into contact with hot engine parts or
sparks from the ignition system. Store fuel in
approved containers, in well-ventilated areas
and away from sparks and flames. NEVER
use fuel as a cleaning agent.
Explosive Fuel
Lethal Exhaust Gases
HAZARD SYMBOLS - Gasoline Powered Models
This
saw
, other property, or the
surrounding environment could be
damaged if you do not follow
instructions.
NOTE