Multiquip SP2 SCE20H20 - Manual (Page 8)

PAGE 8 — MQ SP2 CE SAW — OPERATION & PARTS MANUAL — REV. #6 (09/08/06)
Accidental Starting
MQ SP2 CE SAW — SAFETY MESSAGE ALERT SYMBOLS
ALWAYS place the ON/OFF switch in the OFF
position, when the saw is not in use.
Over Speed Conditions
NEVER tamper with the factory settings of the
engine governor. Personal injury and damage
to the engine or equipment can result if
operating in speed ranges above maximum
allowable.
Guards and Covers In Place
NEVER operate the saw without blade guards
and covers in place. Adhere to safety guidelines
or other applicable local regulations.
Respiratory Hazard
ALWAYS wear approved respiratory
protection.
ALWAYS wear approved eye and hearing
protection.
Sight and Hearing hazard
Equipment Damage Messages
Other important messages are provided throughout this manual
to help prevent damage to your slab saw, other property, or the
surrounding environment.
This concret/asphalt saw, other property, or the
surrounding environment could be damaged if you
do not follow instructions.
CAUTI CAUTI CAUTI CAUTI CAUTION
To avoid injuries and damage to the equipment, ALWAYS
read and understand the contents of operation manual before
operating equipment.
WARNING WARNING WARNING WARNING WARNING