Multiquip HPHA-SERIES - Manual (Page 36)

PAGE 36 — HPLA/HPHA-SERIES 36" WALK-BEHIND TROWEL— OPERATION AND PARTS MANUAL — REV. #3 (07/06/10 )
HPLA/HPHA-SERIES 36" TROWEL — MAINTENANCE
Changing The V- Belt
1. Unscrew the two (2) t-bolts from the belt guard and remove
the lockwashers.(Figure 49).
2. Work belt around and off the bottom pulley and remove belt.
3. Replace with the appropriate belt for your machine:
HPLA36 uses p/n 0261 (A-31)
HPHA36 uses p/n 0152 3 (A-28)
4. Place the belt in the groove of the upper pulley then work the
belt over the bottom pulley into place.
Figure 49. Removing The Belt Guard
NOTE
The V-Belt will tension itself
automatically during operation. NO
FURTHER ADJUSTMENT OR
TENSIONING IS NECESSARY.
5. Replace the belt guard, lockwashers, and secure with the T-
bolts.
NEVER operate equipment
with covers, or guards removed.
Keep
fingers, hands, hair and
clothing away from all moving
parts to prevent injury.
WARNING! WARNING! WARNING! WARNING! WARNING!