Multiquip PSH - Manual (Page 10)

PAGE 10 — STOW PORTO-SCREED — OPERATION & PARTS MANUAL — REV. #1 (03/17/04)
■ NEVER Run engine without air filter. Severe engine damage
may occur. Service air filter frequently to prevent carburetor
malfunction.
■ AVOID wearing jewelry or loose fitting clothing that may snag
on the controls or moving parts as this can cause a serious
injury.
■ ALWAYS keep clear of rotating or moving parts while
operating the PSH.
■ Moving Parts – Shut down the engine before performing
service or maintenance functions. Contact with moving parts
can cause serious injury.
■ ALWAYS clear the work area around the screed of debris
and obstructions to prevent tripping and/or falling onto the
screed.
■ NEVER leave the machine unattended while running, even
for a brief moment. DO NOT leave the screed until it comes
to a complete stop.
■ ALWAYS store equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the
reach of children.
■ ALWAYS use factory authorized parts for replacement.
■ Refer to the HONDA Engine Owner's Manual for engine
technical questions or information recommended by the
manufacturer for this equipment. Damage to the equipment
and/or injury to user may result.
Emergencies
■ ALWAYS know the location of the nearest fire extinguisher .
PORTO-SCREED PSH — RULES FOR SAFE OPERATION
■ ALWAYS know the location of the nearest and first aid kit .
■ In emergencies always know the location of the
nearest phone or keep a phone on the job site .
Also know the phone numbers of the nearest
ambulance , doctor and fire department . This
information will be invaluable in the case of an
emergency.
■ NEVER lubricate components or attempt service on a running
machine.
■ ALWAYS allow the machine a proper amount of time to cool
before servicing.
■ Keep the machinery in proper running condition.
■ Fix damage to the machine immediately and always replace
broken parts.
■ Dispose of hazardous waste properly. Examples of potentially
hazardous waste are used motor oil, fuel and fuel filters.
■ DO NOT use food or plastic containers to dispose of
hazardous waste.
■ ALWAYS shutdown engine before transporting.
■ Tighten fuel tank cap securely and close fuel cock to prevent
fuel from spilling.
■ Drain fuel when transporting PSH over long distances or
bad roads.
■ When placing the PSH inside a truck-bed for transport,
always tie-down the PSH.
■ ALWAYS use proper lifting techniques when moving the PSH.
■ Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
■ No one other than the operator is to be in the working area
when the porto-screed is in operation.
■ Always observe all applicable compulsory regulations
relevant to environmental protection, especially, fuel storage,
the handling of hazardous substances, and the wearing of
protective clothing and equipment. Instruct the user as
necessary, or, as the user, request this information and
training.
Transporting
Maintenance Safety