Belkin F5D8055tt User Manual

Page 43

table of contents

N+ Wireless USB Adapter

section

TroUBleSHooTING

Installation CD-ROM does not start Belkin

Wireless Networking Utility .
If the CD-ROM does not start the Belkin Wireless Networking Utility

automatically, it could be that the computer is running other applications

that are interfering with the CD drive. If the Belkin Wireless Networking

Utility screen does not appear within 15-20 seconds, open up your

CD-ROM drive by double-clicking on the “My Computer” icon. Next,

double-click on the CD-ROM drive in which the Installation CD has

been placed to start the installation. If the installation does not start

automatically, right-click to select “Explore”, then double-click on the

icon named “setup.exe”.

Power led does not come oN; Adapter is not working .
If the LED indicators are not ON, the problem may be that the Adapter

is not connected or installed properly. Verify that the Adapter is plugged

firmly into the USB port of your computer. Check to see that the drivers

for the Adapter have been installed. Right-click on the “My Computer”

icon on your desktop. Choose “Properties” and navigate to the “Device

Manager” and see if your USB Network Adapter is listed without any

errors. If an error is indicated, contact Belkin Technical Support.

link led is blinking slowly; I cannot connect to a wireless network

or the Internet .
If your Adapter appears to be functioning properly, but you cannot

connect to a network or you have a red wireless icon at the bottom of

your screen, the problem may be that there is a mismatch between the

network name (SSID) settings in your wireless network properties.

Check the SSID settings to see if they match. The SSID is case-sensitive

and the spelling on each computer must be exactly the same in order for

the Adapter to connect to the wireless router (or access point).
Note: To check the SSID settings or look for an available network,

double-click the Signal Indicator icon to bring up the “Wireless

Networks” screen. Click “Add” if you do not see the network you are

trying to connect to and type in the SSID.

For more information about setting up an SSID, please reference your

router manufacturer’s user manual. If issues persist even at close range,

please contact Belkin Technical Support.